The Hanging Bar Cover System

The hanging bar system is designed to allow the Fireplace Fashion Cover to be used with a non-magnetic fireplace door assembly (brass or aluminum). This type of Fireplace Fashion Cover attachment will accomplish the same coverage and insulation as the magnetic version, with no modifications to your existing door assembly. The bar cover requires about a 1/8″ gap between the door assembly and the fireplace wall (see photo). Most fireplace door assemblies have an adjustment on the sides or the top of the assembly, on that back side of the door, that allows adjustment for surface irregularities. Please look on the back side of your door assembly and see if it is adjustable or you may already have 1/8″ gap at the top now, if a credit card will fit between the door assembly and the wall, then the bar cover will work on your fireplace. Fireplace Fashion Covers made with the hanging bar system will have aluminum bar in the top instead of magnets.

The cover will magnets in the bottom for weight.

Please insert fireplace size and “HANGING BAR SYSTEM” in “order instructions” box at checkout.

THE HANGING BAR COVER SYSTEM
THE HANGING BAR COVER SYSTEM
THE HANGING BAR COVER SYSTEM

 

Fireplace Fashion Cover made with the hanging bar system will fold in thirds and then thirds again for convenient storage.

There are no products